Kenwood TS 2000 (TS-2000 TS2000 TS-2000X TS-B2000) user and service manual, modifications

• Disconnect power cord and antenna from the transceiver.
  
  
• Remove the top and bottom covers.
  
  
• Remove the top screw from each side of the front panel assembly.
  
  
• Loosen the bottom screw from each side of the front panel assembly.
• Carefully rotate the front panel forward to gain access to the control board(X53-3910-11). This board is mounted vertically against the body of the transceiver. It is not the board that is mounted in the front panel assembly.
  
  
• Locate and remove resistor R53 from the control board.
  
  
• Assemble the transceiver then perform the CPU reset procedure by holding the A=B button in while turning on the power.

Transmit Range: 1.705-30MHz, 49-54MHz, 142-152MHz, 420-450MHz, 1240-1300MHz.