-
Activate switch and dial up a known active frequency.
-
Adjust L3 until PLL locks up and radio begins receiving.
(you need an active frequency to tell when this happens)
-
To return to 140-150 MHZ, repeat above steps with switch off.
Notes and disclaimer
-
Drill a hole in the case of the radio so that L3 can be
adjusted from outside of the radio.
-
The above information is presented for educational
purposes only, and is not an endorsement of any particular
practice.
-
This MOD has been in operation for 6 years with no ill
effects on the radio
-
This MOD courtesy N2MOD.
|
