Just received my new rig, neither the supplier nor Kenwood had the mods
available to date.
- Remove the bottom cover, 5 screws (not the speaker side).
- Locate and remove "W601" (chip resistor) and "W602" (green wire).
They are located within 2 inches of the optional VS-3 voice
synthesizer board.
- Reassemble radio and after power-up, press the reset switch on the
front of radio.
Here is your new TRANSMIT range
136.000 - 174.995
400.000 - 469.995
This is the RECEIVE range (mode selected).
118.000 - 135.995
136.000 - 199.995
200.000 - 299.995
300.000 - 399.995
400.000 - 523.995
800.000 - 823.990
849.000 - 869.990
894.000 - 913.990
934.000 - 1299.990
|