One problem that happens after the mod is the AUTOMATIC REPEATER MODE
no longer functions but repeater shift still works.
What really appears to happen is the Auto repeater mode gets set to
USA spec.
To recap then here is the pad info
Pad 1 is short
Pad 2 is short
Pad 3 is short
Pad 4 is open
Pad 5 is short
Pad 6 is open
I Hope this helps, Remember that transmitting out of band and on a
frequency you are not licenced for is an offence!
One other annoying problem is the fan that is running continously,
This can be changed by connecting the fan to the PA fan, which, under
rx mode has the fan running at a much slower and quieter speed, but
at tx the fan runs as normal.
So you are not actually stopping the rx fan, just slowing it down,
which basically lowwers the air flow, but still circulates the air
during rx.
|
