Press the set button
Turn the tuning dial to #38 SPCONT
Push the tuning dial
Rotate till you see INT
Exit set mode
Now you should hear the left bank on the internal speaker & the right on a external speaker.
If you would like to have two external speakers. Look at the plug connected to the internal speaker. Here you have two choices.
- Unsolder the wires from the speaker and run them out of the radio with the fan wires and connect to a external speaker, or
- Purchase a new plug and leave the internal speaker intact.
I found a new plug from a old computer and used it so that I could hook the internal speaker back up easily if I needed the radio elsewhere.
I am not sure whether this work before the tx/rx mod because I done the mod right out of the box.
good luck
|